[MouseWillow]

This is my new fursona design; Eriphe. Originally, I used my Character Blandon's design for my fursona, but I think this is what I'm going to go with.
Um, I wanted to put this in my siggy, how do you make it transparent?

[Hajime.]

This is really good!

[.Phoenix.]

Great job on the pic, I thought you colored it in or adopted her/him from somewhere XD

So, when you start the drawing, make sure you start with 3 layers, layer 1 being at the bottom.
(You know what to do with the layers 2 and 3 c;)
Before you save+finish the drawing, make layer 1 transparent, showing the checkers.
So, when you have posted the drawing, the background will be white, like this.
Then, you right-click on the drawing to "open in new tab"
Then, go into the URL where it says "format=auto"
Then change "auto" to "png"
Then, copy+paste the URL into your signature between [img]here[/img],
And it's transparent!

Hope this helped!

[flyteck]

Great job on the pic, I thought you colored it in or adopted her/him from somewhere XD

So, when you start the drawing, make sure you start with 3 layers, layer 1 being at the bottom.
(You know what to do with the layers 2 and 3 c;)
Before you save+finish the drawing, make layer 1 transparent, showing the checkers.
So, when you have posted the drawing, the background will be white, like this.
Then, you right-click on the drawing to "open in new tab"
Then, go into the URL where it says "format=auto"
Then change "auto" to "png"
Then, copy+paste the URL into your signature between [img]here[/img],
And it's transparent!

Hope this helped!

Thought I'd simplify this:
>Delete white background so checkers are showing
>In the code (copy image address, paste) find auto and change to png.
>It should be transparent then ^^

[LOCW_Bluestarwarrior]

Awesome! Love the cyborg parts.